The performance is not adequate, what else can I configure?

WARNING: Please read the disclaimer to make sure that all of the installation requirements have been fulfilled!

Go back

Installation Requirements

No specific positioning requirements need to be fulfilled to enable proper functioning of AI-Occupancy It is advisable to draw AI-Occupancy regions by selecting the walking areas only so that occupancy percentage is computed those specific regions and will not be underestimated due to "still" elements of the scene that cannot be occupied by moving people.

Go back

Occupancy sensor configuration

Occupazione Aree

In the drop-down list on the left by selecting "Algorithm Parameters" and then “Occupancy areas” you can add, remove and edit areas to estimate occupancy.
By clicking “Add sensor” it is possible to draw a virtual coil inside the image through "Re-draw the sensor", until a coil of desired dimensions is drawn. After having added a sensor it is possible to configure the following parameters:

  1. Sensor ID: unique identification of added sensor
  2. Sensor name: name associated to the added sensor
  3. Event Interval: the time interval in seconds between the event notification and the following one.

Go back